DUAL IR (2)/DUAL IR (2) EXD, TRIPLE IR (3)/ TRIPLE IR (3) EXD, UV IR(2)/ UV IR2 (2) EXD
1101, 11th floor Technocity IT Premises co-op Society, Sector X-5/3, TTC Industrial Area, Mahape Navi Mumbai 400710 All Rights Reserved By Intech…
FFE
FFE Talentum Flame Detection
Flame detectors that read the fire itself — for fuel handling, process areas and outdoor zones where smoke detection is simply too slow.
Brand overview
Flame Detection by FFE
Talentum is FFE's flame detection range. Rather than waiting for smoke, the detector reads the ultraviolet and infrared radiation a flame emits, and the flicker frequency that distinguishes it from steady heat or light.
Detector type is selected for the fuels present and for what else is in the field of view — welding, hot surfaces and sunlight all have to be discriminated against. Intech surveys the lines of sight, installs, aims and maintains the range.
- Reads radiation, not smoke Response does not wait for combustion products to travel.
- Type matched to the fuel UV, IR and combined versions selected for what is handled on site.
- Discriminates look-alikes Welding arcs, hot work and sunlight are rejected by design.
- Works outdoors Effective where airflow would carry smoke away before anything detected it.
Featured
Featured Talentum Detectors
Which detector suits depends on the fuels present and the lines of sight available.
System
How Flame Detection Works
01
Watch
The detector monitors a cone of view covering the hazard.
02
Read
It measures UV and IR radiation and the flicker frequency of the source.
03
Discriminate
Wavelengths are compared so welding, sunlight and hot surfaces are rejected.
04
Act
A confirmed flame signals the panel and can trigger deluge or shutdown.
Applications
Where Talentum Is Specified
Flame detection is chosen where a release could ignite and the response has to be automatic and immediate.
Fuel handling and storage
Loading, decanting and tank areas.
Industry detailProcess and chemical plant
Reactors and solvent handling areas.
Industry detailTurbine and generator halls
Lubricating oil and fuel systems.
Industry detailPaint and finishing lines
Spray booths and drying ovens.
Industry detailFlammable goods storage
Solvents, aerosols and fuel products.
Industry detailHangars and large structures
Open structures with fuel present.
Industry detailOur services
FFE Talentum Supply, Installation and Support
Product selection and consultation
Choosing the right model for the application rather than the catalogue.
System design and engineering
Layout, sizing and the cause-and-effect where the system drives something.
Installation and commissioning
Installed, commissioned and proven as one tested sequence.
Upgrades and expansion
Extending or replacing an existing installation without starting again.
Preventive maintenance and AMC
Scheduled inspection and testing with a documented record.
Troubleshooting and support
Fault diagnosis from the team that commissioned the system.
Full range
The Complete FFE Talentum Range We Supply
Models & variants
DUAL IR (2)/DUAL IR (2) EXD, TRIPLE IR (3)/ TRIPLE IR (3) EXD, UV IR(2)/ UV IR2 (2) EXD
1101, 11th floor Technocity IT Premises co-op Society, Sector X-5/3, TTC Industrial Area, Mahape Navi Mumbai 400710 All Rights Reserved By Intech Fire & Security Pvt Ltd.
FAQ
Frequently Asked Questions
What project teams usually ask about FFE Talentum.
Still have a question?
Speak directly with one of our fire safety engineers.
Call +91 88795 33000How does a flame detector work?
It responds to the ultraviolet and infrared radiation a flame emits, and to the flicker frequency that distinguishes a flame from steady heat or light.
Why not use smoke detection?
A flammable liquid or gas fire produces little smoke and develops in seconds. Smoke detection would respond only once the fire was fully developed.
Will welding set it off?
A correctly selected detector discriminates against welding, hot surfaces and sunlight by comparing several wavelengths. Selection is the critical part.
How is coverage worked out?
From the hazard outward. Each detector protects a cone of view, so the design follows where a release could occur and what obstructs the sight line.
Can it trigger suppression?
Yes — commonly interlocked to deluge release, emergency shutdown and plant interlocks, commissioned as one sequence.
Does Intech install and maintain it?
Yes — line-of-sight survey, installation, aiming, commissioning and AMC.
Genuine product, direct OEM support
Protect High-Hazard Areas with Flame Detection
Tell us which fuels you handle and an engineer will specify the detector type, its placement and the aiming.