PRO-React Digital Linear Heat Detection Cable
"The ProReact range of digital linear heat detection cables is designed to trigger a response when a specific temperature is reached. If the…
Thermocable
Thermocable ProReact Linear Heat Detection
Heat-sensing cable that makes the whole run the detector — for conveyors, cable trays, tunnels and cold stores.
Brand overview
Linear Heat Detection by Thermocable
ProReact is Thermocable's linear heat detection range. The cable is run along the asset being protected and every metre of it is sensing, so coverage follows the risk exactly rather than approximating it with devices at intervals.
Digital types trigger at a fixed temperature rating anywhere on the run; analogue types measure along the length and report roughly where the heat is, which matters when the run is long and walking it is expensive. Intech surveys the route, installs and maintains the range.
- Every metre senses No gaps between devices, because there are no devices — only the run.
- Follows the asset Clipped above a conveyor, laid in a tray or fixed along a tunnel soffit.
- Fixed or locating Digital rating types, or analogue versions that report position.
- Built for hostile places Dust, wash-down, vibration and temperature swings are normal service.
Featured
Featured ProReact Products
Which type suits depends on the length of the run and how costly it is to search it.
PRO REACT ANALOGUE LINEAR HEAT DETECTION
Analogue linear heat detection systems comprise of a control or interface unit, a zone of a four core analogue linear heat detection cable and an end…
System
How Linear Heat Detection Works
01
Run the cable
Detection cable is installed along the asset, following the actual risk.
02
Sense along the length
Heat anywhere on the run changes the cable's behaviour.
03
Locate where possible
Analogue types report the approximate distance to the hot spot.
04
Act
The controller signals the panel and can stop the conveyor or plant.
Applications
Where ProReact Is Specified
Linear heat detection is chosen where the risk runs along something long and awkward, and spot detection would miss it or be impossible to maintain.
Conveyors and material handling
Belt runs where a seized roller is the usual ignition source.
Industry detailCable tunnels and trays
Cable runs where fire spreads along the route.
Industry detailCold stores and racking
Low temperatures and in-rack runs.
Industry detailCar parks and loading decks
Large, draughty structures with vehicles present.
Industry detailProcess pipe racks
Outdoor runs where smoke disperses before detection.
Industry detailTunnels and service routes
Long, inaccessible structures with constant airflow.
Industry detailOur services
Thermocable ProReact Supply, Installation and Support
Product selection and consultation
Choosing the right model for the application rather than the catalogue.
System design and engineering
Layout, sizing and the cause-and-effect where the system drives something.
Installation and commissioning
Installed, commissioned and proven as one tested sequence.
Upgrades and expansion
Extending or replacing an existing installation without starting again.
Preventive maintenance and AMC
Scheduled inspection and testing with a documented record.
Troubleshooting and support
Fault diagnosis from the team that commissioned the system.
Resources
Thermocable ProReact Datasheets
Every datasheet we hold for the range, linked directly. 3 documents.
Full range
The Complete Thermocable ProReact Range We Supply
Models & variants
PRO-React Digital Linear Heat Detection Cable
"The ProReact range of digital linear heat detection cables is designed to trigger a response when a specific temperature is reached. If the temperature surrounding the cable reaches the activation temperature the two cores quickly come into contact and trigger an alarm. These cables are known as ‘digital’ because they are ‘off’ below the activation temperature and irreversibly switch ‘on’ when the activation temperature is reached." The ProReact range of digital linear heat detection cables is designed to trigger a response when a specific temperature is reached. If the temperature surrounding the cable reaches the activation temperature the two cores quickly come into contact and trigger an alarm. These cables are known as “digital” because they are “off” below the activation temperature and irreversibly switch “on” when the activation temperature is reached. The following alarm temper
Technical datasheetPRO REACT ANALOGUE LINEAR HEAT DETECTION
Analogue linear heat detection systems comprise of a control or interface unit, a zone of a four core analogue linear heat detection cable and an end of line unit. The system identifies fires or overheat conditions by continuously measuring changes in electrical resistance along the detection cable. An alarm is triggered once the resistance along the cable falls below a set threshold, which is determined by the desired alarm temperature (chosen by the user). For ProReact Analogue Linear Heat Detection systems, users can also select a pre-alarm option if they would like an early indication of rising temperature. ProReact Analogue Linear Heat Detection systems can also be reset following a fire or overheat, rather than being replaced, providing the detection cable is not exposed to a temperature above 125⁰C.
Technical datasheetPRO REACT DIGITAL INTERFACE UNITS
The UL approved ProReact Digital Interface Monitor Module was designed to provide additional functionality when used in conjunction with ProReact Digital, ProReact Plus Digital or ProReact VHT LHD cable. It is an optional accessory but is highly recommended given the benefits it delivers to clients. The ProReact Digital Interface Monitor Module can monitor up to 6,000 metres of digital linear heat detection cable across two zones and contains an in-built display showing the state of each zone, including the distance in metres and feet to the alarm point if an alarm is triggered. It also includes an RS-485 Modbus RTU output for integration with a PLC or SCADA system. 1101, 11th floor Technocity IT Premises co-op Society, Sector X-5/3, TTC Industrial Area, Mahape Navi Mumbai 400710 All Rights Reserved By Intech Fire & Security Pvt Ltd.
Technical datasheetFAQ
Frequently Asked Questions
What project teams usually ask about Thermocable ProReact.
Still have a question?
Speak directly with one of our fire safety engineers.
Call +91 88795 33000How does the cable detect heat?
Digital types use conductors held apart by a heat-sensitive polymer that yields at the rated temperature. Analogue types measure temperature continuously along the length.
Digital or analogue — which?
Digital tells you the circuit is in alarm. Analogue reports roughly where, which matters on a long run where searching is expensive.
Will dust or wash-down affect it?
No. There is no optical chamber to contaminate, which is the main reason it is chosen for dirty and wet environments.
Can it stop the conveyor?
Yes — the controller is commonly interlocked to conveyor stop and plant shutdown, commissioned as one sequence.
How is it tested?
By applying heat at a test point and confirming the alarm and interlocked response. Testing and cable inspection are scheduled under AMC.
Can it be retrofitted?
Usually yes. The cable is clipped or tied along the existing asset, which is normally straightforward on a running site.
Genuine product, direct OEM support
Protect Conveyors, Trays and Tunnels
Tell us the route and length involved and an engineer will specify the cable type and quote installation.