PROH20 WATER LEAK DETECTION CABLE
When water comes into contact with the detection cable a control unit can detect changes in the electrical characteristics of the cable and signal an…
Thermocable
Thermocable ProH2O Water Leak Detection
Sensing cable that reports where water is escaping, not just that it is — for raised floors, plant rooms and critical pipework.
Brand overview
Leak Detection by Thermocable
ProH2O is Thermocable's water leak detection range. Sensing cable is laid along the pipework and the low line of the floor void, so the detection follows the same path the water will rather than waiting at a convenient point.
Locating versions measure along the cable and report the approximate distance to the leak, which on a long run under a raised floor turns an alarm into an instruction. Intech surveys the route, installs and maintains the range.
- Cable, not a spot sensor Detection follows the pipe run and the fall of the floor.
- Reports distance Locating versions tell you how far along the run the water is.
- Designed to the route Laid along the path water takes, not where it is convenient to fit.
- Local and remote alarm So a weekend leak is not a Monday discovery.
Featured
Featured ProH2O Products
Whether a locating or a simple zone system suits depends on the length of run and the cost of searching it.
PROH20 PROFESSIONAL MONITORING UNIT
The ProH2O Professional module is a water leak detection system for use in conjunction with ProH2O Water Leak Detection cable. It incorporates…
System
How Leak Detection Works
01
Lay the cable
Sensing cable is routed along pipework and the low points of the void.
02
Monitor
The panel monitors the cable's electrical characteristics along its length.
03
Locate
Water bridging the cable changes those characteristics and the distance is calculated.
04
Alarm
Local and remote alarms are raised, and valve isolation driven where fitted.
Applications
Where ProH2O Is Specified
The system costs a fraction of one flooded UPS room, which is why it usually pays for itself the first time it catches something.
Data centres and server rooms
Raised floors, CRAC units and chilled water pipework.
Industry detailUPS and battery rooms
Where water reaching energised equipment causes an outage.
Industry detailLaboratories and clean areas
Process and purified water distribution.
Industry detailArchives and storage
Irreplaceable records below pipework or plant.
Industry detailHotels and commercial plant
Riser and plant room pipework above occupied space.
Industry detailBasements and service voids
Low points where ingress collects unnoticed.
Industry detailOur services
Thermocable ProH2O Supply, Installation and Support
Product selection and consultation
Choosing the right model for the application rather than the catalogue.
System design and engineering
Layout, sizing and the cause-and-effect where the system drives something.
Installation and commissioning
Installed, commissioned and proven as one tested sequence.
Upgrades and expansion
Extending or replacing an existing installation without starting again.
Preventive maintenance and AMC
Scheduled inspection and testing with a documented record.
Troubleshooting and support
Fault diagnosis from the team that commissioned the system.
Resources
Thermocable ProH2O Datasheets
Every datasheet we hold for the range, linked directly. 2 documents.
Full range
The Complete Thermocable ProH2O Range We Supply
Models & variants
PROH20 WATER LEAK DETECTION CABLE
When water comes into contact with the detection cable a control unit can detect changes in the electrical characteristics of the cable and signal an alarm or other action. The sensor cable is available in pre-terminated lengths for simple assembly and extension. Non-sensing pre-terminated lengths are also available when the cable is to pass through areas which do not require protection.
Technical datasheetPROH20 PROFESSIONAL MONITORING UNIT
The ProH2O Professional module is a water leak detection system for use in conjunction with ProH2O Water Leak Detection cable. It incorporates integrated alarm location which will automatically determine the distance along the length of cable to the water leak. The module is designed for simple and straightforward installation and operation. The ProH2O Professional module may be used as a standalone system or integrated with an addressable/ conventional fire alarm or building management system. In each case the ProH2O Professional module will continuously monitor from 30m (100ft) to 305m (1000ft) of ProH2O Water Leak Detection Cable for a water leak or fault condition (such as a break in the detection cable).
Technical datasheetPROH20 MODULE UNITS
The ProH2O Module unit is compatible with any addressable zone monitor and fire alarm control panel to enhance a conventional system with water leak detection. The unit houses a low-power circuit which continuously monitors the attached detection cable for leaks and faults along its entire length. The presence of water between the two conductive cores triggers the alarm relay and subsequently the addressable module or fire alarm control panel. A break in the detection cores or power loss to the module will trigger the fault circuit triggering a trouble signal on the addressable module or fire alarm control panel. 1101, 11th floor Technocity IT Premises co-op Society, Sector X-5/3, TTC Industrial Area, Mahape Navi Mumbai 400710 All Rights Reserved By Intech Fire & Security Pvt Ltd.
FAQ
Frequently Asked Questions
What project teams usually ask about Thermocable ProH2O.
Still have a question?
Speak directly with one of our fire safety engineers.
Call +91 88795 33000How does it know where the leak is?
By measuring along the cable. Water bridging the conductors changes its characteristics, and the panel converts that into a distance along the run.
Why not spot sensors?
A spot sensor only knows about the point it occupies. Water follows the fall of the slab, which rarely passes through convenient points.
Is the cable reusable?
Generally serviceable once dried, subject to the manufacturer's guidance for the specific product, which we confirm.
Can it shut the water off?
Where the design includes it, yes — the panel can drive valve isolation as well as raising alarms.
Will condensation cause false alarms?
Correct routing matters. The cable is laid clear of surfaces that routinely condense, which is part of the route survey.
Does Intech install and maintain it?
Yes — route survey, installation, commissioning with a simulated leak test, and AMC.
Genuine product, direct OEM support
Protect Critical Rooms from Water Damage
Tell us about your pipework and floor void and an engineer will specify the cable run and quote installation.