Control by zone
Permissions are set per person and area rather than per key.
security
CCTV and Access Control Systems
Know who could go where, and what actually happened — surveillance and access control that work with your fire system rather than against it.
Overview
What Is Integrated Security?
Most security incidents on an industrial or commercial site are not forced entry. They are ordinary access problems: someone in a restricted area who should not be, a store opened outside working hours, a contractor who kept a card after the contract ended, or a dispute about who was present when something went missing.
Those situations are rarely solved by cameras alone or locks alone. Access control establishes who is permitted where; surveillance establishes what actually happened. The two are most useful when they are the same system, because an access event with its associated footage answers a question neither half answers on its own.
- Permissions per person and zone Card, PIN or biometric credentials with time conditions where needed.
- Immediate revocation One credential withdrawn closes every door it opened, without changing a lock.
- Cameras specified to the outcome Observe, identify or recognise each need different resolution at the subject.
- Safe on a fire alarm Escape-route doors release on a confirmed signal, proven at commissioning.
Operation
How the Systems Work Together
01
Present a credential
A card, PIN or biometric is read at a controlled door.
02
Check permissions
The controller checks that person against the zone and the time conditions.
03
Release and record
The door releases and the event is logged with its associated footage.
04
Override on fire
A confirmed fire signal releases escape-route doors regardless of permissions.
Benefits
Why Choose Integrated Security?
Revoke in seconds
Withdrawing one credential closes every door it opened.
An audit trail
A record of who went where and when, retained to your policy.
Footage with purpose
Cameras specified to observe, identify or recognise — they are not the same.
Events linked to video
An access event and its footage answer the question together.
Fire-safe by design
Escape-route release is commissioned and proven with the fire system.
Applications
Applications Across Critical Environments
The practical reason to buy this alongside fire systems is the interface: door release and the fire alarm get commissioned together instead of blaming each other.
Manufacturing and plant
Restricted plant areas, stores and hazardous zones.
Industry detailData centres and comms rooms
High-security rooms with strict access records.
Industry detailPharma and laboratories
Controlled areas with regulatory access requirements.
Industry detailWarehousing and logistics
Goods-in, dispatch and high-value storage.
Industry detailBanking and cash handling
Vaults, cash rooms and dual-authorisation areas.
Industry detailGovernment and public buildings
Perimeter, visitor and restricted-zone control.
Industry detailAlso installed in hospitality, education and healthcare. What a camera must achieve at the subject — observe, identify or recognise — drives its specification far more than the headline resolution does.
Configuration
Inside a CCTV and Access Control System
- IP cameras specified for the outcome required at the subject, not by headline resolution.
- Recording and storage sized to the retention period your incidents actually need.
- Door controllers and readers card, PIN or biometric on the doors that warrant control.
- Locking hardware selected so escape-route doors fail safe on a fire signal.
- Management software permissions by zone, with an audit trail and linked footage.
- Design, commissioning and maintenance including fire interface testing and proving at handover.
Our services
End-to-End Security Solutions
- Site assessment and risk review walking the actual space before anything is specified.
- System selection and application engineering matching the technology to the environment and the risk.
- Camera specification and coverage design so the coverage you pay for is the coverage you get.
- Integration with existing fire alarm systems including the cause-and-effect for any linked response.
- Installation, testing and commissioning with the installed system proven on handover.
- Preventive maintenance and technical support under AMC, with a documented service record.
Compliance
System Integration and Compliance
Standards and approvals
Escape-route door release on a confirmed fire signal is where this work meets Part 4 of the National Building Code (NBC 2016) and the fire NOC. It is commissioned and proven together with the fire system rather than assumed.
Locking hardware is selected so that controlled doors on escape routes fail safe, and that behaviour is demonstrated at handover.
Recording, retention and the handling of personal data follow the applicable Indian data protection and IT rules, configured to your organisation's policy.
FAQ
Frequently Asked Questions
What facility and security teams usually ask about CCTV and access control.
Still have a question?
Speak directly with one of our fire safety engineers.
Call +91 88795 33000Do the doors unlock in a fire?
Escape-route doors must release on a confirmed fire signal. That behaviour is commissioned and proven with the fire system, not assumed from the hardware.
What resolution do I need?
It depends what the footage has to achieve at the subject. Observing that an area is occupied, identifying a known person and recognising an unknown one need very different specifications.
How long should footage be kept?
Long enough for incidents to surface, which is usually longer than people assume. Retention is set to your policy and the applicable data protection rules.
Card, PIN or biometric?
It depends on the area and the risk. Many sites mix them — card for general areas, dual credentials for high-security rooms.
What happens when someone leaves?
Their credential is revoked, which closes every door it opened immediately. That is the main administrative advantage over keys.
Can it integrate with our existing systems?
Often yes, where the equipment supports a compatible interface. We confirm that against what is installed before proposing it.
What do you need to quote a project?
A layout showing doors to be controlled and areas to be covered, user numbers, retention requirements, and whether it is new or an upgrade.
Engineered to your hazard class
Secure Your Site and Keep Escape Routes Safe
Talk to our team about CCTV and access control designed around your zones, your records and your fire strategy.