Simplex Fire Alarm &amp; Detection Systems

Suppression Release Panels

Releasing control for gas and clean agent systems, with actuator supervision and release circuits.

1 model

Releasing Stations and Switches

Manual release, abort and maintenance disconnect devices for supervised releasing systems.

3 models

Modules and Interfaces

Loop devices that extend notification circuits and carry IDNet communications across the system.

1 model

Area of Refuge and Emergency Communication

Two-way emergency communication for areas of refuge and assisted evacuation.

2 models

Featured

Featured Simplex Fire Alarm Control Panels

Three addressable control units from the ES range, each with its datasheet. Which one suits your building comes out of the site assessment.

Large networked installations

4100ES Fire Alarm Control Unit

Addressable control unit for large, networked installations across multiple buildings.

Datasheet

Mid-size buildings and campuses

4010ES Fire Alarm Control Unit

Addressable control unit for mid-size buildings and campus installations.

Datasheet

Compact and single-panel sites

4007ES Fire Alarm Control Unit

Compact addressable control unit for smaller buildings and single-panel sites.

Datasheet

System

A Connected Fire Detection and Alarm System

Initiating devices

Addressable detectors and manual call points report their own identity to the panel.

Control panel

The control unit resolves each address to a location and applies the cause-and-effect.

Notification

Sounders and visual alarm devices operate to the evacuation strategy for the building.

Connected systems

Releasing, lift recall, dampers and door release are driven where the design calls for it.

Applications

Simplex Solutions for Critical Facilities

Detection requirements differ considerably by building type. The panel platform may be the same; the devices on it and the evacuation strategy are not.

Healthcare and hospitals

Phased evacuation and dependency on continuity of care.

Commercial offices

Multi-tenant floors with phased evacuation and lift recall.

Airports and transport

Large public volumes with voice notification requirements.

Educational campuses

Multiple buildings networked back to one monitored system.

Hotels and hospitality

Guest floors, kitchens and back-of-house with differing detection needs.

Industrial facilities

Mixed environments needing different detector types per area.

Our services

Simplex System Supply, Installation and Support

Product selection and consultation

Choosing the right platform and devices for the building rather than the catalogue.

System design and engineering

Device layout, loop design and the cause-and-effect matrix.

Installation and commissioning

Installed, commissioned and proven as one tested sequence.

Upgrades and expansion

Extending or replacing an existing Simplex installation without starting again.

Preventive maintenance and AMC

Scheduled inspection and testing with a device-by-device record.

Troubleshooting and support

Fault diagnosis and technical support from the team that commissioned it.

Resources

Simplex Product Datasheets

Every datasheet we hold for the range, linked directly. 14 documents.

Full range

The Complete Simplex Range We Supply

Models & variants

4004R suppression release panel

4004R is a two-hazard releasing system that incorporates big-panel features into a small and cost-effective package. Its dual hazards can be programmed to provide an agent release for one hazard and preaction or deluge for the other, giving a high degree of flexibility and protection. With the early detection capability of the agent release hazard, the fire should be extinguished before the preaction or deluge system is activated.

Abort and Maintenance Switches

Releasing systems require maintenance disconnect switches and often require abort switches. These abort and maintenance switches are clearly labeled and combine easy operation with rugged construction for high integrity operation.

Abort Switches

Releasing systems often require abort switches. These abort switches are clearly labeled, have a visually striking blue plate and combine easy operation with rugged construction for high integrity operation.

Manual Releasing Stations

4007ES Fire Alarm Control Unit

When combined with Suppression Release Peripherals, the 4007ES series fire alarm control panel provides actuator supervision and control for use in automatic extinguishing, and deluge or preaction releasing systems. Hazard area initiating and notification devices are controlled using either conventional or addressable circuits per standard 4007ES capabilities. The necessary releasing system logic is implemented within the 4007ES control panel as required for the local application.

4010ES Fire Alarm Control Unit

When combined with Suppression Release Peripherals, the 4010ES series fire alarm control unit provides actuator supervision and control for use in automatic extinguishing, and deluge or preaction releasing systems. Hazard area initiating and notification devices are controlled using either conventional or addressable circuits per standard 4010ES capabilities. The necessary releasing system logic is implemented within the 4010ES control unit as required for the local application

4100ES Fire Alarm Control Unit

When combined with Suppression Release Peripherals, the 4100ES series fire alarm control panel provides actuator supervision and control for use in automatic extinguishing, and deluge or preaction releasing systems. Hazard area initiating and notification devices are controlled using either conventional or addressable circuits per standard 4100ES capabilities. The necessary releasing system logic is implemented within the 4100ES control panel as required for the local application.

4006 Fire Alarm Control Unit

For facilities requiring from five to ten initiating zones, the Simplex 4006 Series conventional fire alarm control panels provide flexible initiating circuit monitoring, extensive programmable control capability, and central station connectivity.

4007ES Hybrid, Fire Detection & Control Panel with Addressable & /or Conventional Initiation

Simplex fire alarm solutions are trusted the world over, helping protect millions of people every day in large facilities that range from hospitals, hotels and universities to airports, office buildings and sky scrapers. Customers choose Simplex products for their industry-leading scalability, reliability, long-term value and technology. Now, the Simplex 4007ES panel brings advanced Simplex performance to smaller facilities.

4007ES Fire Control Panels; Fire Detection & Control with Addressable Initiation & Addressable Notification

4009 IDNet NAC Extender for Control with IDNet Communications or Conventional NACs

Provides additional notification appliance circuit (NAC) capacity with flexible operation modes and power-limited design Four, Class B NACs are standard:  Rated 2 A each for conventional reverse polarity 24 VDC notification appliances and providing multiple operation modes  Can be selected to provide synchronization for Simplex® visible notification strobe flashes Capable of controlling TrueAlert non-addressable notification appliances operating with SmartSync two-wire control mode*

4010ES Fire Alarm Control Panel

The Simplex 4010ES fire alarm system is a highly flexible and powerful 1,000-point addressable analog system for small- to mid-sized facilities. Unlike many systems of this size, points can be used for detectors, modules or manual stations as needed to meet the requirements of each building. Labor-saving features such as device-level ground fault isolation and almost dirty smoke sensor status reports reduce installation time for electrical contractors and allows for proactive maintenance to be scheduled at one-time to help eliminate unwanted nuisance alarms for owners and end-users.

4100ES Fire Control Panels Addressable Fire Detection and Control Basic Panel Modules and Accessories

4100ES addressable fire alarm control panels support up to 2,500 points, fire alarm and emergency voice communication, self-testing notification appliances and IP based networking. With scalable architecture and future-proof design, 4100ES panels are ideal for medium to large facilities and multi-building campus style networks. All Simplex addressable panels rely on TrueAlarm addressable detectors.

Johnson Controls Detect 360 Area of Refuge System TCOM-CP2000

An Area of Refuge solution that’s easier to install, more reliable, and more effective. An “Area of Refuge” or “Area of Rescue” is a location that’s designed to keep building occupants safe during a fire or emergency until they can be evacuated. The need for an Area of Refuge is particularly acute when immediate evacuation is impossible or there are occupants with mobility challenges. The Detect360 Area of Refuge Communications System provides a reliable and effective code-compliant Area of Refuge solution that enables occupants to remain safe and stay informed, and provides the information rescuers need to get them quickly evacuated. 1101, 11th floor Technocity IT Premises co-op Society, Sector X-5/3, TTC Industrial Area, Mahape Navi Mumbai 400710 All Rights Reserved By Intech Fire & Security Pvt Ltd.